LEE LUBE & SIZE KIT .323 diameter - NEW

LEE LUBE & SIZE KIT .323 diameter

Lee .323 Lube and Size Kit lubricates and sizes cast bullets, also seats and crimps gas checks. Fits any standard 7/8x14 thread reloading press.

Fastest and easiest way to lubricate and size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Lee Liquid Alox and Reloading Press sold separately.

Please note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. According to our experience, the kit can be used on Turret presses too, you just need to remove the indexing rod. However, since it's not intended to use the Lube and Size Kit this way, we can't guarantee perfect results.

Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary.

To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on.

For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.