Dillon XL650 Toolhead Zero-Play, Free-Float ready - red

Dillon XL650 Toolhead Zero-Play, Free-Float ready - red

The Zero Play Toolhead for Dillon XL650 reloading press, red.

Included in the package:

• 1 x Aircraft-Grade Anodized Aluminium Toolhead
• 1 x Hex Key 2.5 mm
• 2 x Bolts M3 x 20 & Washers
• 1 x Caliber Sticker

Zero-Play System

The Zero Play toolhead does not use the original toolhead pins supplied by Dillon. It is bolted with two M3 bolts that lift the toolhead into the uppermost position. When you cycle cases downward, the toolhead does not move, and cases go out in a straight line. Best practice is to loosen M3 bolts slightly before inserting the index shell-plate with case into dies and tightening M3 bolts to the toolhed best position.

Free-Float System

Floating action allows the dies to center themselves exactly over each cartridge for the best possible alignment and more concentric ammunition.

Free-Float Lock Rings are sold seperately.

Usually you need two free-float rings.One for resizing die and other for bullet seating die. However you can add free-float ring to each station.