Mon–Thu: 9am–4pm, Fri: 9am–2pm
Category
    Brands
      Blog
        Products
          No products found
          NewsBack in stock
          User
          Menu

          Reloading Dies

          Reloading dies are special tools that are fixed into the tool head of the press and are specific for each calibre.
          There are 6 basic functions of dies: de-priming, sizing, powder charging, expanding, seating and crimping.

          The sizing and depriming functions are usually combined in one die, wherethe case is cleared of the old primer and sized to factory dimensions. The sizing is performed either on the entire length of the cartridge case (full length sizing) or just a neck only (collet/neck sizing dies - available only for bottle cases).

          The expanding and powdering function is most often combined in pistol calibre dies. The purpose of the expanding function of the die is to create a slight flare on the neck of the brass case to make it easier to seat the bullet. During this operation, the case may also be charged with gunpowder using either attached automatic powder dispenser, or manually through attached powder funnel.

          The seating die is used for the accurate seating of the bullet in the cartridge case. The use of a proper seating die ensures that the bullet is always properly seated on axis and at a consistent depth. Some seating dies also offer a crimp function, but we recommend using a separate die for this step if available.

          The crimping die crimps the bullet in the case. This die is an absolute must if you will be using the ammo in a self-loading gun. It is also recommended to crimp cartridges loaded into a magazine. In addition, proper crimping improves accuracy, because the pressures in the cartridge needed to push the bullet out are higher. Increasing the pressure at the beginning of the shot ensures more consistent burning of the powder, more balanced pressures in individual shots, and thus more constant bullet velocities.
          A special type of crimp die is the LEE Carbide Factory Crimp Die, which crimps the bullet and re-sizes the whole case with carbide sizer, so that each round is safely chambered with the reliability of a factory product.

          Display by filter


          Number of records:  4888

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 223 WSSM

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .240 WBY MAG

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .243 WSSM

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6MM PPC

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6MM REM

          1 652,00 Kč 
          In stock

          The RCBS Small Base Sizer Die Set is designed specifically for reloading bottleneck cases that will be used in tight-chambering semi-automatic, pump, or lever-action rifles.

          1 726,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .25-20 WIN

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .257 WBY MAG

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6.5X55 SWED MAU

          1 652,00 Kč 
          In stock

          RCBS Neck 2-Die Set 6.5X55 SWED MAU includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.

          1 726,00 Kč 
          In stock

          RCBS's Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes.

          1 417,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6.8 REM SPC

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .270 WBY MAG

          1 652,00 Kč 
          In stock

          RCBS Neck 2-Die Set .270 WIN includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.

          1 726,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .243 WIN

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .270 WIN SHORT MAG

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM REM MAG

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .280 REM

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM T/CU

          1 652,00 Kč 
          In stock

          RCBS's Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes.

          1 417,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7X57 MAUSER

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7X64 BREN

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7-08 REM

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .284 WIN

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .30-06 SPRINGFIELD

          1 652,00 Kč 
          In stock

          RCBS Neck 2-Die Set .30-06 SPRINGFIELD includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.

          1 726,00 Kč 
          In stock

          The RCBS® Seater Die is a specialized reloading die designed to seat the bullet and provide a built-in roll crimper to secure the bullet in place simultaneously. Caliber .30-06 SPRINGFIELD

          1 417,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .30-30 WIN

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .30 LUGER

          1 652,00 Kč 
          In stock

          This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .30-378 WBY MAG

          1 652,00 Kč 
          In stock
          Loading...
          NewsBack in stock

          Basket contains not allowed items

          Shopping cart is empty

          Show basket

          The article was added to comparison

          Please wait...
          Unable to complete your order, please try again later